国产suv精品一区二区四,无码人妻系列不卡免费视频,无码中文字幕久久久久久,久久频这里精品99香蕉,亚洲人成网址,综合99综合久久久久久久,国内精品伊人久久久久7777,国产一区二区三区地址
東莞市創億嘉潤滑油有限公司 服務熱線:0769-81283290 13725804996
快捷 高效 周到 貼心 全心全意為客戶服務 工業潤滑油、工業潤滑脂、工業潤滑劑咨詢熱線:13725804996 電話:0769-81283290
美孚潤滑油 殼牌潤滑油 嘉實多潤滑油
BP潤滑油 福斯潤滑油 加德士潤滑油
克魯勃潤滑油 道達爾潤滑油 埃索潤滑油
協同潤滑油 出光潤滑油 摩托瑞斯潤滑油
  • 東莞創億嘉潤滑油有限公司

    電話:0769-81283290

    聯系人:劉超

    手機:13725804996

    企業QQ:1352876343

    郵箱:1352876343@qq.com

    網址:www.netfrom.cn

    地址:廣東省東莞市南城區高新產業園區宏一路

    郵編:523073

聯系方式
殼牌潤滑油系列 > 殼牌航空潤滑油 > AEROSHELL FLUID 31
AEROSHELL FLUID 31 詳細說明 (瀏覽1547次)
AEROSHELL FLUID 31
AeroShell Fluid 31 is a synthetic hydrocarbon based aircraft hydraulic fluid
with greatly improved fire resistance characteristics when compared with
conventional petroleum products.
AeroShell Fluid 31 has a specially designed base stock which imparts a
relatively high flash point, excellent low temperature properties and good
oxidation and thermal stability. In addition, AeroShell Fluid 31 is formulated
with high technology additives to provide oxidation and corrosion
resistance, antiwear, and anti-foaming protection.
AeroShell Fluid 31 is superclean filtered to ensure optimum performance in
particulate monitored systems.
AeroShell Fluid 31 is dyed red.
The useful operating temperature range is –40 to +205°C.
APPLICATIONS
AeroShell Fluid 31 is recommended for use in aircraft, ordnance, and
missile systems operating from –40°C to +205°C . This fluid should be
considered for use in auto pilots, shock absorbers, brakes, flight control
systems, hydraulic servo-controlled systems and other systems using
synthetic elastomer seals.
An increasing number of aircraft manufacturers now recommend use of this
type of fluid in aircraft hydraulic systems in preference to mineral hydraulic
oils. This move has been prompted by need to use fluids with better fire
resistant properties.
AeroShell Fluid 31 is also approved for use in the Honeywell (formerly
Garrett) cooling turbine (cabin air compressors).
Increasingly this type of hydraulic fluid is being adopted for use in
hydraulic systems of military aircraft in place of mineral hydraulic fluids.
AeroShell Fluid 31 is a synthetic hydrocarbon oil and should not be used in
contact with incompatible seal materials. Refer to the General Notes at the
front of this section for further information.
AeroShell Fluid 31 is compatible with AeroShell Fluids 4, 41, 51, 61 and
71 and can be used in systems designed to operate with MIL-PRF-5606,
MIL-PRF-6083, MIL-PRF-87257 and MIL-PRF-46170 fluids.
Chlorinated solvents should not be used for cleaning hydraulic components
which use AeroShell Fluid 31. The residual solvent contaminates the
hydraulic fluid and may lead to corrosion.
www.shell.com/aviation
190
Hydraulic Fluids
SPECIFICATIONS
U.S. Approved MIL-PRF-83282D
British (MIL-PRF-83282D)
French Equivalent to DCSEA 437/A
Russian –
NATO Code H-537
Joint Service Designation OX-19
PROPERTIES MIL-PRF-83282D TYPICAL
Oil type Synthetic Synthetic
Hydrocarbon Hydrocarbon
Kinematic viscosity mm
2
/s
@ 205°C 1.0 min 1.07
@ 100°C 3.45 min 3.53
@ 40°C 14.0 min 14.33
@ –40°C 2200 max 2098
Flashpoint
Cleveland Open Cup °C 205 min 237
Fire Point °C 245 min 251
Total Acidity mgKOH/g 0.10 max 0.01
Evaporation loss 6.5 hrs
@150°C % m 20 max 10
Relative density @ 15.6/15.6°C Report 0.850
Pourpoint °C –55 max Below –55
Table continuedNOTES
The AeroShell Book
Edition 18 2003
193
Hydraulic Fluids
www.shell.com/aviation
192
Hydraulic Fluids
PROPERTIES MIL-PRF-83282D TYPICAL
Low temperature stability
72 hrs @ ?40°C Must pass Passes
High temperature stability
100 hrs @ 205°C Must pass Passes
Gravimetric Filtration, mg/100ml 0.3 max 0.2
Filtration time minutes 15 max Less than 15
Particle Count, Automatic, per Lt
5 to 15 μm 10000 max 1331
16 to 25 μm 1000 max 190
26 to 50 μm 150 max 55
51 to 100 μm 20 max 4
>100 μm 5 max 0
Water content ppm 100 max 82
Foam resistance ASTM Seq 1 Must pass Passes
Flame propagation cm/s Must pass Passes
Rubber swell, NBR-L % 18 to 30 Passes
4-Ball Wear, 1 hr @ 75°C
scar dia, mm
1 kg load/1200 rpm 0.21 max 0.18
10 kg load/1200 rpm 0.30 max 0.24
40 kg load/1200 rpm 0.65 max 0.50
Oxidation & corrosion stability
168 hrs @ 121°C
– metal weight change Must pass Passes
– viscosity change @ 40°C % 10 max Less than 10
– change in acidity mgKOH/g 0.2 max Less than 0.02
Flammability Must pass Passes
A viscosity/temperature curve is shown at the end of this section.
上一產品:AEROSHELL SSF AND LGF/起落架液壓油Hydraulic Fluids
下一產品:AEROSHELL CALIBRATING FLUID 2
版權所有:東莞市創億嘉潤滑油有限公司   粵ICP備19160599號
工業齒輪油生產廠家,想了解批發價格,用途,哪個牌子好,品牌哪家好請聯系我們.
工業潤滑油
主站蜘蛛池模板: 中文无码人妻有码人妻中文字幕| 国产成人亚洲日韩欧美| 日韩高清亚洲日韩精品一区二区| 久久精品国产99国产精品澳门| 久久精品国产精品第一区| 自拍偷自拍亚洲精品播放| 人妻丰满熟妇av无码区| 好吊色欧美一区二区三区四区| 亚洲人成色99999在线观看| 久久热99这里只有精品| 久久精品免视看国产成人| 国内精品久久黄色三级乱| 亚洲成在人线AV品善网好看| 国产成人午夜福利院| 国产午夜福利免费入口| 国产亚洲精品视频一二区| 久热这里只有精品视频3| 亚洲欧美日韩高清一区二区三区| 国产69精品久久久久久妇女迅雷 | yy111111在线尤物| 中文字幕亚洲综合第一页| 伊人激情av一区二区三区| 韩国美女av一区二区三区四区| 99久久国产综合精品女图图等你| 国产永久免费高清在线观看| 日韩不卡一区二区三区四区| 国产精品任我爽爆在线播放6080| 日韩有码中文在线观看| 中文亚洲爆乳av无码专区| 欧美性受xxxx喷水性欧洲| 国产精品爆乳奶水无码视频免费 | 亚洲男人av天堂久久资源| 久久99国产精品尤物| 国产亚洲一二三区精品| 1024国产基地永久免费| 国产精品猎奇系列在线观看| 国产高清自产拍av在线| 国产精品久久这里只有精品| 大伊香蕉精品视频在线| 偷青青国产精品青青在线观看| 亚洲欧洲精品成人久久曰|